LED Neon Strip- 13.5X15.5mm- bending side vertically -single color
This product is an LED neon belt with a size of 13.5x15.5 mm. It is characterized by it that it can be bent vertically and only a single color. The LED neon lamp belt is a very popular lighting product. Its unique features make it popular in indoor and outdoor decorative applications. This neon lamp is moderate in size and is very suitable for occasions with high requirements for details. It can be bent vertically so that it can be flexibly adjusted during installation to meet the needs of different scenes.
|
LED Source |
SMD2835 |
|
LED Brand |
EPISTAR |
|
LED Qty |
120LEDs per meter |
|
LED BIN |
3SDCM |
|
Luminous Flux |
24-26Im per LED |
|
Input Voltage |
12VDC / 24VDC |
|
Power |
10 watts per meter |
|
Color Temperature |
Single Color / Dual Color |
|
Cut Unit |
Every 2.5cm(12VDC) / Every 5cm(24VDC) |
|
Beam Angle |
120° |
|
CRI |
Ra80 / Ra90 |
|
PCB Width & Diffuser |
8mm/10mm width, silicone diffuser |
|
Operating Temperature |
-20℃ to 50℃ |
|
IP Rating |
IP67 |
|
Bending Direction |
Side bending |
|
Warranty |
3 years |
|
Max. Run Length |
5 meters per roll as standard |
|
Certifications |
ISO9001, ETL, CE, RoHS |
Product Features
A Variety Of Wire Entry Methods
Suitable For Different Installation Sites
Customized Service
Always Meet Your Demand
Certificates
Project Cases
FAQ
2. Using double side thermal conductive tape to attach the LED strip to the aluminum profile for better heat dissipation.
3. Ensure air circulation in the installation area, as air circulation helps dissipate heat from the LED strip.
4. Ensure that the ambient temperature is not too high. The maximum ambient temperature should not typically exceed 50 degrees.