LED Neon Strip- 20X18mm- bending direction vertically -single color
We are very proud to introduce our new product -LED neon belt. The product has a size of 20x18mm, making it easy to install and manage in compact space. Our LED neon belt is designed in a vertical direction to enable it to adapt to various application scenarios.They are not only energy -saving and environmentally friendly, but also easy to operate and maintain.This neon light belt is a monochrome style that provides a variety of options to meet your lighting needs.
|
Dimension |
W20* H 18mm |
|
LED Source |
SMD2835 |
|
LED Brand |
EPISTAR |
|
LED Qty |
120LEDs per meter |
|
LED BIN |
3SDCM |
|
Luminous Flux |
24-26Im per LED |
|
Input Voltage |
12VDC / 24VDC |
|
Power |
12 watts per meter |
|
Color Temperature |
2700-6500K / Red / Blue / Green / Yellow / Golden / Ice Blue |
|
Cut Unit |
Every 2.5cm(12VDC) / Every 5cm(24VDC) |
|
Beam Angle |
120° |
|
CRI |
Ra80 / Ra90 |
|
PCB Width & Diffuser |
8mm width, silicone diffuser |
|
Operating Temperature |
-20℃ to 50℃ |
|
IP Rating |
IP67 |
|
Bending Direction |
Up & Down bending |
|
Warranty |
3 years |
|
Max. Run Length |
5 meters per roll as standard |
|
Certifications |
ISO9001, ETL, CE, RoHS |
Product Features
A Variety Of Wire Entry Methods
Suitable For Different Installation Sites
Customized Service
Always Meet Your Demand
Certificates
Project Cases
FAQ
2. Using double side thermal conductive tape to attach the LED strip to the aluminum profile for better heat dissipation.
3. Ensure air circulation in the installation area, as air circulation helps dissipate heat from the LED strip.
4. Ensure that the ambient temperature is not too high. The maximum ambient temperature should not typically exceed 50 degrees.