HUAYU Led Strip Light Manufacturer Creates Superior Interior And Exterior Led Lighting Solutions By Manufacturing Architectural Flexible Custom Led Strip Light, Led Neon Strip, Led Linear Light And Accessories.

LED Neon Strip- 12X25mm- bending side vertically -single color

The LED neon belt -12x25mm, a neon belt with a unique curved side design. This product uses excellent LED technology to provide you with excellent lighting effects. Our neon lamp belt can be freely vertically bent, so that you can create a unique and personalized lighting effect. You can fix the neon lights on the wall, ceiling, furniture or other flat surface according to your own ideas and needs.

Inquiry

Write a Review

Dimension	W12 * H 25mm
LED Source	SMD2835
LED Brand	EPISTAR
LED Qty	120LEDs per meter
LED BIN	3SDCM
Luminous Flux	24- 261m per LED
Input Voltage	12VDC / 24VDC
Power	12 watts per meter
Color Temperature	Single Color / Dual Color / RGB / RGBW / SPI RGB DMX512 Single Color &RGB
Cut Unit	Every 2.5cm(12VDC) / Every 5cm(24VDC)
Beam Angle	120°
CRI	Ra80 / Ra90
PCB Width & Diffuser	8mm width, silicone diffuser
Operating Temperature	-20°C to 50°C
IP Rating	IP67
Bending Direction	Side bending
Warranty	3 years
Max. Run Length	5 meters per roll as standard
Certifications	ISO9001, ETL, CE, RoHS

Product Features

Anti-UV protection

High transmittance, 15-20% higher than the industry

55℃-40℃ EXTREME ENVIRONMENTS CAN ALSO BE USED

100% dow-corning silicone food-grade silicone

A Variety Of Wire Entry Methods

Suitable For Different Installation Sites

5 (4)

6 (3)

7 (4)

Customized Service

Always Meet Your Demand

LED Neon Strip- 12X25mm- bending side vertically -single color 9

5 years warranty

LED Neon Strip- 12X25mm- bending side vertically -single color 10

No MOQ

LED Neon Strip- 12X25mm- bending side vertically -single color 11

Customized

LED Neon Strip- 12X25mm- bending side vertically -single color 12

Free Sample

LED Neon Strip- 12X25mm- bending side vertically -single color 13

3 Min.quote

LED Neon Strip- 12X25mm- bending side vertically -single color 14

Shipping in 24h

LED Neon Strip- 12X25mm- bending side vertically -single color 15

Free design service

LED Neon Strip- 12X25mm- bending side vertically -single color 16

Learn more about services

Certificates

zhengshu1

zhengshu2

zhengshu3

zhengshu4

zhengshu5

zhengshu6

zhengshu7

zhengshu8

Project Cases

1 (7)

2 (3)

FAQ

How to reuse a leftover led strip?

If the LED strip you have purchased is cuttable and you are cutting at the LED strip’s cut mark, you can reuse the leftover LED strip. You can use these leftover LED strips without wires with quick solderless connectors.

How much power do LED strips use?

Generally speaking, power W/m is marked on the label of the led strip. Then, the total power of the led strip is equal to the W/m multiplied by the total meters.Common wattages for led strip in the market are 5w/m, 10w/m, 15w/m, 20w/m. For example, the led strip is 15W/m, and you use 5m to decorate your Kitchen，then total power is 15*5=75W

How to keep my LED strip lights from overheating?

1. Use the appropriate power for the LED strip, generally recommended for 8mm PCBs with a maximum power of 15W/m, 10mm, 12mm PCBs with a maximum power of 20W/m.
2. Using double side thermal conductive tape to attach the LED strip to the aluminum profile for better heat dissipation.
3. Ensure air circulation in the installation area, as air circulation helps dissipate heat from the LED strip.
4. Ensure that the ambient temperature is not too high. The maximum ambient temperature should not typically exceed 50 degrees.

GET IN TOUCH WITH Us

just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs